| |
| |
Roller and belt conveyors |
|
ROLLER CONVEYOR |
Applications : |
Light transport by gravity the small ones limp and cases or produced
identical whose bottom is sufficiently smooth and rigid. In the installations one can use them as bridges between the other means of transport and like storage tracks.
|
| Construction : |
Composition in cross-section or curved. The chassy is composed of aluminum or steel PROFIL I. Lengths of standardized sections 1.000,2.000 and 3.000 mm.
|
| |
Width of standard track: |
300, 400 et 500 mm.
|
| |
Rollers : |
Out of steel or plastic, alternate assembly.
|
| |
Distance between axes : |
50, 75, 100, 125 and 150 mm corresponding to dimensions of the product.
|
| |
Radius of standard curve: |
interior : 800 mm.
|
| |
Support : |
Device of raising. Heights of 200 up to 2.050 mm. |
 |
TRANSPORT WITH ROLLERS |
Applications : |
Transport by gravity of limp, cases, etc. In the systems one can use
them as bridges between various means of transport, equipped or not
with devices of translation. Various compositions corresponding to
the functions. |
| Construction : |
Composition in cross-sections or curved. The frame is composed of profiles I out of steel or aluminum. The lengths are standardized sections 1.000,2.000 and 3.000 mm.
|
| |
Width of standard track: |
300, 400, 500 and 600 mm.
|
| |
Rollers : |
Out of steel or plastic.
|
| |
Distance between axes : |
62,5, 75, 100, 125, 150 and 200 mm corresponding to dimensions of the product.
|
| |
Radius of standard curve: |
Interior 800 mm; application of conical or fragmented rollers. |
 |
CONVEYOR GRAVITIES ORDERED OR ACCUMULATOR |
Applications : |
In the situation where a ordered transport is required and of which it
circuit requires to intercalate or shift to transmute or turn over.
|
| Frame: |
Out of reinforced shaped steel of cross-pieces. Length of sections standardized 2.000 mm.
|
| |
Order rollers: |
By a chain of central order on sprocket-wheels which are on a side of the roller or by a drive belt which is under the rollers.
|
| |
Standard width: |
400, 500 and 600 Misters In option: larger widths.
|
| |
Distance between axes : |
Corresponding to the load and dimensions of the product. 100 mm or multiple .
|
| |
Curves: |
Equipped with conical rollers. Standard interior ray 800 mm. The accumulating gravity conveyor as same specifications. This conveyor asserts himself when the principal function is to accumulate transported materials. |
| |
Principles of accumulation: |
The rollers are ordered by friction. Order by the chain
of order or découplement of this one by section. Free rollers on the two sides in the chain of order. |
 |
CONVEYORS GRAVITIES BY REVOLVES, ORDERS AND ACCUMULATORS FOR PALLETS |
| Applications : |
Transport by gravity, ordered or accumulated comparable pallets or loads.
|
| Construction of frame: |
In profiles U in lengths of standardized pallets + 200 mm
|
| |
Orders of the rollers: |
For the gravity conveyors ordered and accumulators a chain of central order on sprocket-wheels which are on a side of the roller.
|
| |
Width of standard track: |
800, 1.000 and 1.200 mm.
|
| |
In option : |
Widths of greater dimensions.
|
| |
Distance between axes : |
Corresponding to the load of the track 150 mm in multiple. The gravity conveyors and accumulators for pallets have about the same specifications having for principal function the accumulation of pallets to make the bridge between the differences of time and capacities |
| |
Principle of accumulation: |
The rollers are ordered by friction. Coupling with the chain of central order or uncoupling of this one per section of the track. |
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
